EQ2 UI - Blue
Created by Drakah
Version 9.3 - May 14, 2021
Folder Name: drakah_intg_eqii_blue
shakahr.com


Introduction:
*** ALWAYS use a fresh installation of an interface!

This UI simulates the UI I created for EQ1 and was made for a resolution of 1680 x 1050.
If you are not using the same resolution, then you will need to adjust the windows accordingly, hopefully to a similar setup I have via the screenshot. Some windows may be hard to move, but it is possible. If you cannot move the window, make sure the window is Unlocked. as well as the Click-threw option would pose a problem to move things.

To Install:

1) Go to EverQuest II\UI folder
2) You should see 3 folders - Default, Default_Blue and fonts
3) Extract the Zip file to EverQuest II\UI
4) You should now have 4 folders - Default, Default_Blue, fonts, and drakah_intg_eqii_blue
5) Double-click the drakah_intg_eqii_blue folder, and you should see a whole bunch of files and 1 folder. If you see another drakah_intg_eqii_blue folder, then you extracted it wrong....just cut and paste the folder back one notch.
6) Copy the EQ2.ini file, from the UI folder, to the EverQuest II root directory.
7) Rename the Servername_Character_eq2_uisettings.xml to your server and character name and copy/replace that to your EverQuest II root directory. There is also a Beastlord version called Servername_Beastlord_eq2_uisettings.xml.
8) Install/Launch EQ2MAP Updater, and it should patch your UI folder accordingly once your have the settings correctly established.

Note:
If you have an issue loading the UI, you can try editing the eq2_recent.ini file and look for:
cl_ui_skinname

it should say:
cl_ui_skinname drakah_intg_eqii_blue